 |
 |
 |
 |
|
 |
|
Specification
- Two Framing modes: Magnification and stand, can take pictures quickly.
- Make use of the connection between the LCD screen protector and the viewfinder, it is easy to install and remove. Also ensure the safety of LCD.
- Support 3" LCD with ratio 4:3, compatible for LCD with ratio 3:2.
- 3X optical magnification, can observe the details well.
- Whole sealing structure, it can hold back the light completely while magnification framing or stand framing, you can see the real color of the image.
- 40mm Well sealed hood blocks out the light while magnifying the frame for accurate color and focusing.
- Suitable LCD:
- 3" 4:3 compatible for 3:2,
- Nikon D700/ D300S/ D300/ D90/ D7000/ D3100/ D3000
- Canon 7D, 5D Mark II, 1D Mark IV, T2i/550D, T1i/450D, 60D, G9, G10, S90;
- Panasonic DMC-GF1, 2, LX3,5; Pentax K-7;
- any DSLR with 3" LCD screen
- Directions:
- 1. Start with camera recording approximately 12 minutes before applying.
- 2. While you apply the interface frame set your camera to the brightest display setting.
- 3. Without removing the paper backing, please practice placing the frame over your cameras screen.
- 4. We recommend that the round filleted tab should be in the upper right corner when applied.
- 5. Remove the paper backing and carefully attach the frame to the camera body. Be sure to that the frame is evenly placed around the LCD screen
- 6. Apply pressure (gently massage with your fingertips) to ensure a better bond between the frame and your camera.
- 7. Leave a weight on the freshly applied frame and leave your camera running for at least 15 minutes so the heat generated will ensure a better fit.
- 8. Initial bond strength of approximately 76% is achieved after 15 minutes
|
|
|
|
|
|
|
My Cart
Good Eyepiece 
Awesome 
