My strobe head will not turn on. What should I do?
There are a few things to check about your strobe head that are easy to check on your own.
- Make sure that all bulbs are correctly installed and not broken.
- Ensure that your power cord is not damaged and is snuggly plugged in at both ends.
- Check your fuse and make sure that it is not blown.
In most cases, verifying these items will correct your problem.
Changing the Fuse
Changing the fuse in this unit is simple, as the fuse is easily accessible on the back of the strobe head.
 |
Step 1:
Unscrew the FUSE knob on the back of the strobe head by turning it counter-clockwise.
|
 |
Step 2:
Take out the knob and the fuse from the strobe head.
|
 |
Step 3:
Remove the blown fuse and replace with a new fuse.
|
 |
Step 4:
Place the new fuse in the strobe head and tighten by turning clockwise. DO NOT overtighten.
|
If trying these steps do not correct the issue you are experiencing, please complete our
onine RMA form to request an exchange of the defective item.
